View UPC2762TB1_4722519.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
BIPOLAR ANALOG INTEGRATED CIRCUITS
PC2762TB,PC2763TB,PC2771TB
3 V, SUPER MINIMOLD SILICON MMIC MEDIUM OUTPUT POWER AMPLIFIER FOR MOBILE COMMUNICATIONS
DESCRIPTION
The PC2762TB, PC2763TB and PC2771TB are silicon monolithic integrated circuits designed as amplifier for mobile communications. These ICs operate at 3 V. The medium output power is suitable for RF-TX of mobile communications system. These IC is manufactured using NEC's 20 GHz fT NESATTMIII silicon bipolar process. This process uses direct silicon nitride passivation film and gold electrodes. These materials can protect the chip surface from pollution and prevent corrosion/migration. Thus, this IC has excellent performance, uniformity and reliability.
FEATURES
* Supply voltage * Medium output power : VCC = 2.7 to 3.3 V : PC2762TB; PO(1 dB) = +8.0 dBm TYP. @ f = 0.9 GHz
PC2763TB; PO(1 dB) = +9.5 dBm TYP. @ f = 0.9 GHz PC2771TB; PO(1 dB) = +11.5 dBm TYP. @ f = 0.9 GHz
* Power gain : PC2762TB; GP = 13 dB TYP. @ f = 0.9 GHz
PC2763TB; GP = 20 dB TYP. @ f = 0.9 GHz PC2771TB; GP = 21 dB TYP. @ f = 0.9 GHz
* Upper limit operating frequency : PC2762TB; fu = 2.9 GHz TYP. @ 3dB Bandwidth
PC2763TB; fu = 2.7 GHz TYP. @ 3dB Bandwidth PC2771TB; fu = 2.2 GHz TYP. @ 3dB Bandwidth
* High-density surface mounting : 6-pin super minimold package (2.0 x 1.25 x 0.9 mm)
APPLICATIONS
* Buffer amplifiers for mobile telephones : PC2762TB, PC2763TB * PA driver for PDC800M : PC2771TB
ORDERING INFORMATION
Part Number Package 6-pin super minimold Marking C1Z C2A C2H Supplying Form Embossed tape 8 mm wide. 1, 2, 3 pins face the perforation side of the tape. Qty 3 kpcs/reel.
PC2762TB-E3 PC2763TB-E3 PC2771TB-E3
Remark To order evaluation samples, please contact your local NEC sales office. Part number for sample order: PC2762TB, PB2763TB, PC2771TB Caution Electro-static sensitive devices
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. P12710EJ3V0DS00 (3rd edition) Date Published February 2001 N CP(K) Printed in Japan
The mark
shows major revised points.
(c)
1997, 2001
PC2762TB, PC2763TB, PC2771TB
PIN CONNECTIONS
(Top View) (Bottom View) 4 5 6 4 5 6 3 2 1
Pin No. 1
Pin Name INPUT GND GND OUTPUT GND VCC
C1Z
3 2 1
2 3 4 5
Marking is an example of PC2762TB
6
PRODUCT LINE-UP (TA = +25C, V CC = Vout = 3.0 V, ZS = ZL = 50 )
fu (GHz) 2.9 PO(1 dB) (dBm) +8.0 @ f = 0.9 GHz +7.0 @ f = 1.9 GHz 2.7 +9.5 @ f = 0.9 GHz +6.5 @ f = 1.9 GHz 2.2 +11.5 @ f = 0.9 GHz +9.5 @ f = 1.5 GHz 4.0 +8.0 @ f = 0.9 GHz +7.0 @ f = 1.9 GHz +7.0 @ f = 2.4 GHz GP (dB) 13.0 @ f = 0.9 GHz 15.5 @ f = 1.9 GHz 20.0 @ f = 0.9 GHz 21.0 @ f = 1.9 GHz 21.0 @ f = 0.9 GHz 21.0 @ f = 1.5 GHz 19.0 @ f = 0.9 GHz 21.0 @ f = 1.9 GHz 22.0 @ f = 2.4 GHz 21.5 @ f = 0.9 GHz 20.5 @ f = 1.9 GHz 20.5 @ f = 2.4 GHz 30.0 6-pin super minimold C3F 23.0 36.0 27.0 ICC (mA) 26.5
Part No.
Package 6-pin minimold 6-pin super minimold 6-pin minimold 6-pin super minimold 6-pin minimold 6-pin super minimold 6-pin super minimold
Marking C1Z
PC2762T PC2762TB PC2763T PC2763TB PC2771T PC2771TB PC8181TB
C2A
C2H
C3E
PC8182TB
2.9
+9.5 @ f = 0.9 GHz +9.0 @ f = 1.9 GHz +8.0 @ f = 2.4 GHz
Remark Typical performance. Please refer to ELECTRICAL CHARACTERISTICS in detail. Caution The package size distinguishes between minimold and super minimold.
2
Data Sheet P12710EJ3V0DS
PC2762TB, PC2763TB, PC2771TB
SYSTEM APPLICATION EXAMPLE
Digital cellular telephone
RX I Q
DEMOD.
/N SW
PLL PLL
I 0 TX PA Phase shifter 90 Q : PC2762TB, 2763TB, 2771TB applicable
Caution The insertion point is different due to the specifications of conjunct devices.
Data Sheet P12710EJ3V0DS
3
PC2762TB, PC2763TB, PC2771TB
PIN EXPLANATION
Applied Voltage (V) - Pin Voltage (V)
Note
Pin No. 1
Pin Name
Function and Applications
Internal Equivalent Circuit
INPUT
1.31
1.01
0.97
Signal input pin. A internal matching circuit, configured with resistors, enables 50 connection over a wide band. A multi-feedback circuit is designed to cancel the deviations of hFE and resistance. This pin must be coupled to signal source with capacitor for DC cut. Ground pin. This pin should be connected to system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible. All the ground pins must be connected together with wide ground pattern to decrease impedance difference. Signal output pin. The inductor must be attached between VCC and output pins to supply current to the internal output transistors.
6
2 3 5
GND
0
-
4
1
*
4
OUTPUT
Voltage as same as VCC through external inductor 2.7 to 3.3
-
3
2
5
* PC2762TB does not have this capacitance.
6
VCC
-
Power supply pin, which biases the internal input transistor. This pin should be externally equipped with bypass capacitor to minimize its impedance.
Note Pin voltage is measured at VCC = 3.0 V. Above: PC2762TB, Center: PC2763TB, Below: PC2771TB.
4
Data Sheet P12710EJ3V0DS
PC2762TB, PC2763TB, PC2771TB
ABSOLUTE MAXIMUM RATINGS
Ratings Parameter Symbol Conditions
PC2762TB PC2763TB
PC2771TB
Unit
Supply Voltage Total Circuit Current Power Dissipation
VCC ICC PD
TA = +25C, pin 4 and pin 6 TA = +25C Mounted on double copper clad 50 x 50 x 1.6 mm epoxy glass PWB, TA = +85C 70
3.6 77.7 270
V mA mW
Operating Ambient Temperature Storage Temperature Input Power
TA Tstg Pin TA = +25C
-40 to +85 -55 to +150 +10 +13
C C dBm
RECOMMENDED OPERATING RANGE
Parameter Supply Voltage Symbol VCC MIN. 2.7 TYP. 3.0 - MAX. 3.3 Unit V Remark Same voltage should be applied to pin 4 and pin 6. Only for PC2771TB
Operating Frequency
fopt
0.8
1.9
GHz
Data Sheet P12710EJ3V0DS
5
PC2762TB, PC2763TB, PC2771TB
ELECTRICAL CHARACTERISTICS (Unless otherwise specified, TA = +25C, V CC = Vout = 3.0 V, ZS = ZL = 50 )
PC2762TB, PC2763TB
PC2762TB
Parameter Circuit Current Power Gain Symbol ICC GP Test Conditions MIN. No signal f = 0.9 GHz f = 1.9 GHz f = 0.9 GHz f = 1.9 GHz 3 dB down below from gain at f = 0.1 GHz f = 0.9 GHz f = 1.9 GHz f = 0.9 GHz f = 1.9 GHz f = 0.9 GHz f = 1.9 GHz f = 0.9 GHz f = 1.9 GHz - 11 11.5 - - 2.7 TYP. 26.5 13 15.5 6.5 7.0 2.9 MAX. 35.0 16 17.5 8.0 9.0 - - - - - - - - - MIN. - 18 18 - - 2.3 TYP. 27.0 20 21 5.5 5.5 2.7 MAX. 35.0 23 24 7.0 7.5 - - - - - - - - - mA dB
PC2763TB
Unit
Noise Figure
NF
dB
Upper Limit Operating Frequency Isolation
fu
GHz
ISL
22 20 6.0 5.5 8.0 9.0 +5.5 +4.5
27 25 9.0 8.5 11.0 12.0 +8.0 +7.0
25 24 8.0 8.0 5.0 6.0 +7.0 +4.0
30 29 11.0 11.0 7.0 9.0 +9.5 +6.5
dB
Input Return Loss
RLin
dB
Output Return Loss
RLout
dB
1 dB Gain Compression Output Power
PO (1 dB)
dBm
PC2771TB
PC2771TB
Parameter Circuit Current Power Gain Symbol ICC GP No signal f = 0.9 GHz f = 1.5 GHz f = 0.9 GHz f = 1.5 GHz 3 dB down below from gain at f = 0.1 GHz Test Conditions MIN. - 19 18 - - 1.8 TYP. 36.0 21 21 6.0 6.0 2.2 MAX. 45.0 24 24 7.5 7.5 - - - - - - - - - - - mA dB Unit
Noise Figure
NF
dB
Upper Limit Operating Frequency Isolation
fu
GHz
ISL
f = 0.9 GHz f = 1.5 GHz f = 0.9 GHz f = 1.5 GHz f = 0.9 GHz f = 1.5 GHz f = 0.9 GHz f = 1.5 GHz f = 0.9 GHz f = 1.5 GHz
25 25 10 10 6.5 5.5 +9.0 +7.0 - -
30 30 14 14 9.0 8.5 +11.5 +9.5 +12.5 +11.0
dB
Input Return Loss
RLin
dB
Output Return Loss
RLout
dB
1 dB Gain Compression Output Power Saturated Output Power
PO (1 dB)
dBm
PO (sat)
dBm
6
Data Sheet P12710EJ3V0DS
PC2762TB, PC2763TB, PC2771TB
STANDARD CHARACTERISTICS FOR REFERENCE (Unless otherwise specified, TA = +25C, V CC = Vout = 3.0 V, ZS = ZL = 50 )
PC2762TB, PC2763TB
Reference Parameter Symbol Test Conditions
MIN.
PC2762TB
TYP. MAX. MIN.
PC2763TB
TYP. MAX.
Unit
Saturated Output Power Adjacent Channel Power
PO (sat)
f = 0.9 GHz f = 1.9 GHz f = 0.9 GHz /4 QPSK waveNote PO = +4 dBm f = 50 kHz f = 100 kHz
- - - - - -
+9.0 +8.5 -64 -64 -16 -10
- - - - - -
- - - - - -
+11.0 +8.0 -61 -62 -27 -14
- - - - - -
dBm
Padj
dBc
3rd Order Intermodulation Distortion
IM3
2 sine wave input. Output of each tone PO (each) = +4 dBm
f1 = 0.900 GHz f2 = 0.902 GHz f1 = 1.900 GHz f2 = 1.902 GHz
dBc
dBc
Note /4 DQPSK modulated wave input, data rate 42 kbps, Filter roll off = 0.5, PN 9
PC2771TB
Reference Parameter Adjacent Channel Power 1 Symbol Padj1 Test Conditions
MIN. TYP. MAX.
Unit - - - - - - -61 -72 -59 -71 -18 -12 - - - - - - dBc
f = 0.9 GHz /4 QPSK waveNote PO = +7 dBm
f = 50 kHz f = 100 kHz f = 50 kHz f = 100 kHz
Adjacent Channel Power 2
Padj2
f = 1.5 GHz /4 QPSK waveNote PO = +7 dBm
dBc
3rd Order Intermodulation Distortion
IM3
2 sine wave input. Output of each tone PO (each) = +7 dBm
f1 = 0.900 GHz f2 = 0.902 GHz f1 = 1.500 GHz f2 = 1.502 GHz
dBc
dBc
Note /4 DQPSK modulated wave input, data rate 42 kbps, Filter roll off = 0.5, PN 9
Data Sheet P12710EJ3V0DS
7
PC2762TB, PC2763TB, PC2771TB
TEST CIRCUIT
VCC 1 000 pF C3 6 50 IN 1 000 pF C1 1 4 L C2 1 000 pF 50 OUT
2, 3, 5
COMPONENTS OF TEST CIRCUIT FOR MEASURING ELECTRICAL CHARACTERISTICS
Type C1, C2 C3 L Bias Tee Capacitor Bias Tee Value 1 000 pF 1 000 pF 1 000 nH
EXAMPLE OF ACTUAL APPLICATION COMPONENTS
Type C1 to C3 L Chip capacitor Chip inductor
Value 1 000 pF 100 nH 10 nH
Operating Frequency 100 MHz or higher 100 MHz or higher 2.0 GHz or higher
INDUCTOR FOR THE OUTPUT PIN
The internal output transistor of this IC consumes 20 mA, to output medium power. To supply current for output transistor, connect an inductor between the Vcc pin (pin 6) and output pin (pin 4). Select large value inductance, as listed above. The inductor has both DC and AC effects. In terms of DC, the inductor biases the output transistor with minimum voltage drop to output enable high level. In terms of AC, the inductor make output-port-impedance higher to get enough gain. In this case, large inductance and Q is suitable. For above reason, select an inductance of 100 or over impedance in the operating frequency. The gain is a peak in the operating frequency band, and suppressed at lower frequencies. The recommendable inductance can be chosen from example of actual application components list as shown above.
CAPACITORS FOR THE VCC, INPUT, AND OUTPUT PINS
Capacitors of 1 000 pF are recommendable as the bypass capacitor for the Vcc pin and the coupling capacitors for the input and output pins. The bypass capacitor connected to the Vcc pin is used to minimize ground impedance of Vcc pin. So, stable bias can be supplied against Vcc fluctuation. The coupling capacitors, connected to the input and output pins, are used to cut the DC and minimize RF serial impedance. Their capacitance are therefore selected as lower impedance against a 50 load. The capacitors thus perform as high pass filters, suppressing low frequencies to DC. To obtain a flat gain from 100 MHz upwards, 1 000 pF capacitors are used in the test circuit. In the case of under 10 MHz operation, increase the value of coupling capacitor such as 10 000 pF. Because the coupling capacitors are determined by equation, C = 1/(2Rfc).
8
Data Sheet P12710EJ3V0DS
PC2762TB, PC2763TB, PC2771TB
ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD
AMP-2
Top View
3 1
IN
5 4
OUT C
L
2 C 1Z
C
Mounting direction (Marking is an example for PC2762TB) VCC C
COMPONENT LIST
Value C L 1 000 pF Example: 10 nH
6
Notes 1. 30 x 30 x 0.4 mm double sided copper clad polyimide board. 2. Back side: GND pattern 3. Solder plated on pattern 4. : Through holes
For more information on the use of this IC, refer to the following application note: USAGE AND APPLICATIONS OF 6-PIN SUPER MINI-MOLD SILICON MEDIUM-POWER HIGH-FREQUENCY AMPLIFIER MMIC (P13252E).
Data Sheet P12710EJ3V0DS
9
PC2762TB, PC2763TB, PC2771TB
TYPICAL CHARACTERISTICS (Unless otherwise specified, TA = +25C)
- PC2762TB -
CIRCUIT CURRENT vs. SUPPLY VOLTAGE
50 No signal 50
CIRCUIT CURRENT vs. OPERATING AMBIENT TEMPERATURE
No signal VCC = 3.0 V
Circuit Current ICC (mA)
30
Circuit Current ICC (mA)
1 2 3 Supply Voltage VCC (V) 4
40
40
30
20
20
10
10
0
0 - 60 - 40 - 20 0 +20 +40 +60 +80 +100 Operating Ambient Temperature TA (C)
NOISE FIGURE, POWER GAIN vs. FREQUENCY
20 18 16 VCC = 3.3 V VCC = 3.0 V 18
POWER GAIN vs. FREQUENCY
16
Power Gain GP (dB)
Noise Figure NF (dB)
Power Gain GP (dB)
14 12 10 8 6 4
GP
VCC = 2.7 V
TA = +85C 14 TA = +25C 12 TA = - 40C 10
10 8 6 4 2
NF
VCC = 3.3 V
VCC = 3.0 V
VCC = 2.7 V 3.0 8 0.1 0.3 1.0 Frequency f (GHz)
2 0.1
VCC = 3.0 V 3.0
0.3 1.0 Frequency f (GHz)
ISOLATION vs. FREQUENCY
0
INPUT RETURN LOSS, OUTPUT RETURN LOSS vs. FREQUENCY
0
Input Return Loss RLin (dB) Output Return Loss RLout (dB)
VCC = 3.0 V - 10
VCC = 3.0 V RLin - 10
Isolation ISL (dB)
- 20
- 20
RLout
- 30
- 30
- 40 0.1
1.0 0.3 Frequency f (GHz)
3.0
- 40 0.1
1.0 0.3 Frequency f (GHz)
3.0
10
Data Sheet P12710EJ3V0DS
PC2762TB, PC2763TB, PC2771TB
- PC2762TB -
OUTPUT POWER vs. INPUT POWER
+15 f = 0.9 GHz
Output Power Pout (dBm)
OUTPUT POWER vs. INPUT POWER
+15 f = 0.9 GHz VCC = 3.0 V
Output Power Pout (dBm)
VCC = 3.0 V
+10
VCC = 3.3 V
+10
TA = +85C TA = +25C
+5 VCC = 2.7 V 0
+5 0
TA = -40C
-5
-5 -10 -20
-10 -20
-15
-10 -5 Input Power Pin (dBm)
0
+5
-15
-10 -5 Input Power Pin (dBm)
0
+5
OUTPUT POWER vs. INPUT POWER
+15 f = 1.9 GHz
Output Power Pout (dBm)
OUTPUT POWER vs. INPUT POWER
+15 f = 1.9 GHz VCC = 3.0 V
Output Power Pout (dBm)
VCC = 3.0 V +10
TA = +85C TA = +25C
+10 VCC = 3.3 V +5 VCC = 2.7 V 0
+5 TA = -40C 0
-5 -10 -20
-5 -10 -20
-15
-10 -5 Input Power Pin (dBm)
0
+5
-15
-10 -5 Input Power Pin (dBm)
0
+5
SATURATED OUTPUT POWER vs. FREQUENCY
Saturated Output Power PO (sat) (dBm)
SATURATED OUTPUT POWER vs. FREQUENCY
Saturated Output Power PO (sat) (dBm)
+13
VCC = 3.3 V
Pin = +3 dBm
+13 TA = +25C TA = +85C Pin = +3 dBm VCC = 3.0 V
+11 VCC = 3.0 V +9 VCC = 2.7 V +7
+11
+9 TA = -40C +7
+5 +3 0.1
+5 +3
1.0 0.3 Frequency f (GHz)
3.0
0.1
1.0 0.3 Frequency f (GHz)
3.0
Data Sheet P12710EJ3V0DS
11
PC2762TB, PC2763TB, PC2771TB
- PC2762TB -
3RD ORDER INTERMODULATION DISTORTION 3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE vs. OUTPUT POWER OF EACH TONE
3rd Order Intermodulation Distortion IM3 (dBc) 3rd Order Intermodulation Distortion IM3 (dBc)
-60 -50 -40 -30 -20 -10 0 -15
-60 f1 = 1.900 GHz f2 = 1.902 GHz -50 -40 -30 VCC = 2.7 V -20 -10 0 -15 VCC = 3.3 V VCC = 3.0 V
f1 = 0.900 GHz f2 = 0.902 GHz VCC = 3.3 V VCC = 3.0 V VCC = 2.7 V
-10 -5 0 +5 +10 Output Power of Each Tone PO (each) (dBm)
-10 -5 0 +5 +10 Output Power of Each Tone PO (each) (dBm)
Remark The graphs indicate nominal characteristics.
12
Data Sheet P12710EJ3V0DS
PC2762TB, PC2763TB, PC2771TB
S-PARAMETERS (TA = +25C, VCC = Vout = 3.0 V)
- PC2762TB - S11-FREQUENCY
0.1 G 3.0 G
2.0 G
S22-FREQUENCY
3.0 G
0.1G
2.0 G 1.0 G
Data Sheet P12710EJ3V0DS
13
PC2762TB, PC2763TB, PC2771TB
TYPICAL S-PARAMETER VALUES (TA = +25C)
PC2762TB
VCC = Vout = 3.0 V, ICC = 29 mA
FREQUENCY MHz 100.0000 200.0000 300.0000 400.0000 500.0000 600.0000 700.0000 800.0000 900.0000 1000.0000 1100.0000 1200.0000 1300.0000 1400.0000 1500.0000 1600.0000 1700.0000 1800.0000 1900.0000 2000.0000 2100.0000 2200.0000 2300.0000 2400.0000 2500.0000 2600.0000 2700.0000 2800.0000 2900.0000 3000.0000 3100.0000 S11 MAG. 0.338 0.346 0.348 0.340 0.329 0.324 0.341 0.359 0.378 0.375 0.363 0.353 0.357 0.377 0.402 0.414 0.426 0.434 0.448 0.463 0.483 0.492 0.492 0.486 0.489 0.500 0.511 0.511 0.494 0.465 0.441 ANG. -1.3 -2.0 -1.2 -1.9 -3.1 -6.2 -8.1 -7.6 -6.5 -5.1 -5.2 -6.7 -8.8 -11.7 -12.7 -13.2 -13.6 -16.1 -19.0 -21.7 -23.9 -25.8 -29.7 -34.6 -40.4 -44.6 -48.5 -50.4 -52.9 -55.9 -60.6 MAG. 4.560 4.581 4.616 4.661 4.689 4.726 4.844 4.927 5.057 5.179 5.306 5.400 5.567 5.706 5.820 5.987 6.081 6.182 6.229 6.328 6.382 6.431 6.424 6.329 6.146 5.997 5.822 5.693 5.553 5.334 5.157 S21 ANG. -3.4 -7.6 -11.3 -15.8 -19.5 -23.6 -27.4 -31.5 -35.8 -41.0 -45.9 -51.0 -56.5 -61.7 -68.0 -73.7 -80.1 -86.7 -93.2 -99.7 -106.7 -113.8 -121.2 -128.8 -136.1 -143.1 -149.9 -157.0 -163.0 -169.5 -175.5 MAG. 0.039 0.039 0.039 0.040 0.040 0.041 0.042 0.043 0.044 0.045 0.047 0.047 0.048 0.049 0.052 0.052 0.055 0.056 0.057 0.057 0.058 0.058 0.060 0.060 0.062 0.061 0.064 0.066 0.065 0.065 0.066 S12 ANG. 1.0 2.7 6.8 8.1 11.6 13.7 15.8 18.1 19.3 20.3 22.1 23.7 26.1 24.5 26.7 26.8 29.0 28.2 28.5 28.0 28.5 29.0 30.1 30.2 31.1 32.1 31.4 34.0 33.8 35.5 35.5 MAG. 0.310 0.311 0.302 0.296 0.290 0.292 0.291 0.292 0.284 0.280 0.285 0.288 0.288 0.285 0.282 0.285 0.288 0.291 0.286 0.282 0.282 0.282 0.278 0.268 0.260 0.251 0.248 0.237 0.222 0.203 0.189 S22 ANG. -5.5 -9.5 -12.3 -16.2 -20.2 -24.1 -26.2 -28.3 -30.9 -35.3 -40.0 -43.4 -45.7 -47.9 -52.8 -58.1 -62.0 -66.1 -70.4 -76.2 -81.5 -86.9 -91.7 -98.4 -104.5 -111.3 -116.7 -121.5 -128.3 -134.5 -141.1 2.23 2.20 2.20 2.18 2.20 2.12 2.01 1.90 1.77 1.72 1.64 1.62 1.54 1.44 1.32 1.27 1.18 1.14 1.09 1.07 1.01 0.99 0.99 1.01 1.02 1.05 1.03 1.04 1.11 1.20 1.27 K
14
Data Sheet P12710EJ3V0DS
PC2762TB, PC2763TB, PC2771TB
TYPICAL CHARACTERISTICS (Unless otherwise specified, TA = +25C)
- PC2763TB -
CIRCUIT CURRENT vs. SUPPLY VOLTAGE
50 No signal 40 50
CIRCUIT CURRENT vs. OPERATING AMBIENT TEMPERATURE
No signal VCC = 3.0 V
Circuit Current ICC (mA)
30
Circuit Current ICC (mA)
1 2 3 Supply Voltage VCC (V) 4
40
30
20
20 10 0 +20 +40 +60 +80 +100 - 60 - 40 - 20 0 Operating Ambient Temperature TA (C)
10
0
NOISE FIGURE, POWER GAIN vs. FREQUENCY
24 22 GP VCC = 3.3 V VCC = 3.3 24 22
POWER GAIN vs. FREQUENCY
TA = +85 C TA= +85C TA = +25 C TA = 40 C TA= +25C TA= --40C
Power Gain GP (dB)
Power Gain GP (dB)
20 18 16 14 12 10 8 6 0.1 NF VCC = 2.7 V VCC = 3.0 V VCC = 2.7 VCC = 3.0 1.0 0.3 Frequency f (GHz) VCC = 3.0 V VCC = 3.0 VCC = 2.7 V VCC = 2.7
20 TA = +25 C 18 TA= +25C 16 14 12 10 8 VCC = 3.0 V 0.1 1.0 0.3 Frequency f (GHz) 3.0 TA = 40 C TA= --40C TA = +85 C TA= +85C
Noise Figure NF (dB)
7 6 5 4 3
VCC = 3.3 V VCC = 3.3
3.0
6
ISOLATION vs. FREQUENCY
0
INPUT RETURN LOSS, OUTPUT RETURN LOSS vs. FREQUENCY
0
- 10
Input Return Loss RLin (dB) Output Return Loss RLout (dB)
VCC = 3.0 V
RLout RLo
VCC = 3.0 V
Isolation ISL (dB)
- 10
- 20
- 20 RLin - 30
- 30
- 40 - 50 0.1
0.3 1.0 Frequency f (GHz)
3.0
- 40 0.1
1.0 0.3 Frequency f (GHz)
3.0
Data Sheet P12710EJ3V0DS
15
PC2762TB, PC2763TB, PC2771TB
- PC2763TB -
OUTPUT POWER vs. INPUT POWER
+15 f = 0.9 GHz VCC = 3.3 V +15
OUTPUT POWER vs. INPUT POWER
f = 0.9 GHz VCC = 3.0 V TA = +85C
Output Power Pout (dBm)
Output Power Pout (dBm)
+10 VCC = 3.0 V VCC = 2.7 V 0
+10 TA = - 40C +5 TA = - 40C TA = +25C 0 TA = +85C -5 - 10 - 25
+5
-5
- 10 - 25
- 20
- 15 - 10 -5 Input Power Pin (dBm)
0
- 20
- 15 - 10 -5 Input Power Pin (dBm)
0
OUTPUT POWER vs. INPUT POWER
+15 f = 1.9 GHz VCC = 3.3 V +15
OUTPUT POWER vs. INPUT POWER
f = 1.9 GHz VCC = 3.0 V TA = +85C
Output Power Pout (dBm)
VCC = 2.7 V +5
Output Power Pout (dBm)
+10
VCC = 3.0 V
+10 TA = - 40C TA = +25C TA = - 40C 0 TA = +85C -5 TA = +25C - 10 - 25
+5
0
-5 - 10 - 25
- 20
- 15 - 10 -5 Input Power Pin (dBm)
0
- 20
- 15 - 10 -5 Input Power Pin (dBm)
0
SATURATED OUTPUT POWER vs. FREQUENCY
Saturated Output Power PO (sat) (dBm) Saturated Output Power PO (sat) (dBm)
+15 +13 +11 VCC = 3.0 V +9 +7 +5 +3 0.1 VCC = 2.7 V Pin = - 3 dBm VCC = 3.3 V +15 +13 +11 +9
SATURATED OUTPUT POWER vs. FREQUENCY
TA = +85C Pin = - 3 dBm VCC = 3.0 V
TA = +25C TA = - 40C
+7 +5 +3 0.1
1.0 0.3 Frequency f (GHz)
3.0
1.0 0.3 Frequency f (GHz)
3.0
16
Data Sheet P12710EJ3V0DS
PC2762TB, PC2763TB, PC2771TB
- PC2763TB -
3RD ORDER INTERMODULATION DISTORTION 3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE vs. OUTPUT POWER OF EACH TONE
3rd Order Intermodulation Distortion IM3 (dBc) 3rd Order Intermodulation Distortion IM3 (dBc) - 60 - 50 - 40 - 30 - 20 - 10 0 - 15 VCC = 2.7 V f1 = 0.900 GHz f2 = 0.902 GHz VCC = 3.3 V VCC = 3.0 V - 60 - 50 - 40 VCC = 3.0 V - 30 VCC = 2.7 V - 20 - 10 0 - 15 f1 = 1.900 GHz f2 = 1.902 GHz VCC = 3.3 V
- 10
-5
0
+5
+10
- 10
-5
0
+5
+10
Output Power of Each Tone PO (each) (dBm)
Output Power of Each Tone PO (each) (dBm)
Remark The graphs indicate nominal characteristics.
Data Sheet P12710EJ3V0DS
17
PC2762TB, PC2763TB, PC2771TB
S-PARAMETERS (TA = +25C, VCC = Vout = 3.0 V)
- PC2763TB - S11-FREQUENCY
0.1 G 3.0 G 2.0 G 1.0 G
S22-FREQUENCY
3.0 G 0.1 G
2.0 G 1.0 G
18
Data Sheet P12710EJ3V0DS
PC2762TB, PC2763TB, PC2771TB
TYPICAL S-PARAMETER VALUES (TA = +25C)
PC2763TB
VCC = Vout = 3.0 V, ICC = 28 mA
FREQUENCY MHz 100.0000 200.0000 300.0000 400.0000 500.0000 600.0000 700.0000 800.0000 900.0000 1000.0000 1100.0000 1200.0000 1300.0000 1400.0000 1500.0000 1600.0000 1700.0000 1800.0000 1900.0000 2000.0000 2100.0000 2200.0000 2300.0000 2400.0000 2500.0000 2600.0000 2700.0000 2800.0000 2900.0000 3000.0000 3100.0000 S11 MAG. 0.231 0.242 0.250 0.245 0.242 0.241 0.263 0.291 0.316 0.322 0.318 0.309 0.322 0.344 0.371 0.380 0.388 0.378 0.378 0.375 0.369 0.351 0.331 0.306 0.300 0.294 0.290 0.270 0.248 0.219 0.198 ANG. -1.4 -0.2 2.7 2.8 2.0 -2.2 -5.3 -5.6 -5.1 -4.0 -5.4 -9.0 -14.2 -20.6 -23.7 -27.5 -30.6 -36.4 -42.1 -46.6 -50.5 -53.8 -59.8 -66.4 -73.1 -75.8 -77.1 -77.7 -78.7 -82.3 -88.7 MAG. 10.210 10.305 10.464 10.655 10.863 11.093 11.544 11.843 12.291 12.676 13.066 13.311 13.661 13.845 13.824 13.890 13.634 13.236 12.724 12.290 11.707 11.130 10.524 9.824 9.152 8.583 8.029 7.610 7.240 6.827 6.516 S21 ANG. -3.8 -8.5 -12.9 -18.2 -22.8 -28.1 -33.2 -39.0 -45.1 -52.4 -59.8 -67.3 -75.8 -83.9 -93.0 -101.5 -110.5 -119.6 -127.9 -136.1 -144.0 -151.7 -159.1 -165.9 -172.3 -178.2 176.2 170.6 166.1 161.2 156.9 MAG. 0.023 0.023 0.024 0.024 0.026 0.027 0.028 0.029 0.029 0.030 0.031 0.031 0.033 0.033 0.035 0.035 0.036 0.035 0.035 0.035 0.035 0.036 0.036 0.034 0.035 0.034 0.035 0.037 0.039 0.039 0.040 S12 ANG. 2.4 7.8 9.3 13.4 16.1 19.9 22.3 22.5 23.9 25.6 24.1 27.0 28.8 28.5 30.1 28.1 29.2 29.9 30.9 32.9 33.0 35.7 36.8 38.7 40.1 43.8 46.3 47.7 51.1 53.6 55.1 MAG. 0.406 0.412 0.407 0.407 0.405 0.414 0.419 0.424 0.424 0.425 0.438 0.442 0.441 0.434 0.435 0.439 0.439 0.428 0.411 0.393 0.385 0.373 0.359 0.336 0.321 0.306 0.299 0.288 0.270 0.253 0.244 S22 ANG. -4.1 -7.5 -9.9 -13.9 -17.6 -21.6 -24.6 -27.7 -31.9 -37.1 -42.5 -47.8 -51.2 -56.0 -62.2 -68.9 -74.6 -81.3 -87.0 -93.4 -99.6 -104.9 -110.3 -117.5 -123.3 -129.4 -133.9 -138.6 -143.6 -150.1 -156.2 1.68 1.66 1.58 1.55 1.44 1.37 1.25 1.16 1.09 1.02 0.96 0.96 0.90 0.87 0.82 0.80 0.78 0.84 0.89 0.94 0.99 1.06 1.13 1.31 1.41 1.55 1.58 1.63 1.67 1.79 1.88 K
Data Sheet P12710EJ3V0DS
19
PC2762TB, PC2763TB, PC2771TB
TYPICAL CHARACTERISTICS (Unless otherwise specified, TA = +25C)
- PC2771TB -
CIRCUIT CURRENT vs. SUPPLY VOLTAGE
50 No signal Circuit Current ICC (mA) Circuit Current ICC (mA) 40 40 50
CIRCUIT CURRENT vs. OPERATING AMBIENT TEMPERATURE
No signal VCC = 3.0 V
30
30
20
20
10
10 0 0 - 60 - 40 - 20 +20 +40 +60 +80 +100 Operating Ambient Temperature TA (C)
0
1 2 3 Supply Voltage VCC (V)
4
NOISE FIGURE, POWER GAIN vs. FREQUENCY
24 22 Power Gain GP (dB) 20 18 16 14 12 10 8 6 0.1 VCC = 3.3 V NF VCC = 3.0 V VCC = 3.3 V VCC = 2.7 V VCC = 3.0 V GP VCC = 3.0 V VCC = 2.7 V VCC = 3.3 V 24 22 Power Gain GP (dB)
POWER GAIN vs. FREQUENCY
TA = +25C TA = - 40C
20
TA = +85C
Noise Figure NF (dB)
7 6 5 4 3
18
16 VCC = 2.7 V 0.3 1.0 Frequency f (GHz) 3.0 VCC = 3.0 V 14 0.1 0.3 1.0 Frequency f (GHz)
3.0
ISOLATION vs. FREQUENCY
0 VCC = 3.0 V - 10 Isolation ISL (dB) Input Return Loss RLin (dB) Outpur Return Loss RLout (dB)
INPUT RETURN LOSS, OUTPUT RETURN LOSS vs. FREQUENCY
0 VCC = 3.0 V RLout - 10
- 20
- 20 RLin - 30
- 30
- 40
0.1
0.3 1.0 Frequency f (GHz)
3.0
- 40
0.1
0.3 1.0 Frequency f (GHz)
3.0
20
Data Sheet P12710EJ3V0DS
PC2762TB, PC2763TB, PC2771TB
- PC2771TB -
OUTPUT POWER vs. INPUT POWER
+15 VCC = 3.3 V f = 0.9 GHz
Output Power Pout (dBm)
OUTPUT POWER vs. INPUT POWER
+15 f = 0.9 GHz VCC = 3.0 V +10 TA = +85C
+10 VCC = 2.7 V +5 VCC = 3.0 V
Output Power Pout (dBm)
TA = - 40C TA = +25C TA = +25C TA = - 40C
+5
0
0 TA = +85C
-5 - 25 - 20 -5 - 15 - 10 Input Power Pin (dBm) 0
-5 - 25 - 20 - 15 - 10 -5 Input Power Pin (dBm) 0
OUTPUT POWER vs. INPUT POWER
+15 f = 1.5 GHz
Output Power Pout (dBm)
OUTPUT POWER vs. INPUT POWER
+15 f = 1.5 GHz VCC = 3.0 V +10 TA = - 40C +5 TA = +25C 0 TA = - 40C -5 TA = +85C - 25 - 20 - 15 - 10 -5 Input Power Pin (dBm) 0 TA = +85C TA = +25C
VCC = 3.3 V
Output Power Pout (dBm)
+10 VCC = 2.7 V +5 VCC = 3.0 V 0
-5 - 10 - 25 - 20 - 15 - 10 -5 Input Power Pin (dBm) 0
OUTPUT POWER vs. INPUT POWER
+15 f = 1.9 GHz
Output Power Pout (dBm)
OUTPUT POWER vs. INPUT POWER
+15 f = 1.9 GHz VCC = 3.0 V TA = +85C
VCC = 3.3 V
Output Power Pout (dBm)
+10 VCC = 3.0 V +5 VCC = 2.7 V 0
+10 TA = +25C
+5
TA = - 40C
0 -5 - 10
-5 - 10 - 25 - 20 - 15 - 10 -5 Input Power Pin (dBm) 0
- 25
- 20
- 15 - 10 -5 Input Power Pin (dBm)
0
Data Sheet P12710EJ3V0DS
21
PC2762TB, PC2763TB, PC2771TB
- PC2771TB -
SATURATED OUTPUT POWER vs. FREQUENCY
Saturated Output Power PO (sat) (dBm) Saturated Output Power PO (sat) (dBm)
SATURATED OUTPUT POWER vs. FREQUENCY
+17 TA= +25C +15 TA= +85C +13 +11 TA= -40C +9 +7 +5 0.1 0.3 1.0 Frequency f (GHz) 3.0 Pin = -3 dBm VCC = 3.0 V
+17 Pin = -3 dBm +15 VCC = 3.3 V +13 +11 +9 +7 +5 0.1 0.3 1.0 Frequency f (GHz) 3.0 VCC = 3.0 V VCC = 2.7 V
3RD ORDER INTERMODULATION DISTORTION 3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE vs. OUTPUT POWER OF EACH TONE
3rd Order Intermodulation Distortion IM3 (dBc)
-60 -50 -40 -30 -20 -10 0 -15 VCC = 2.7 V f1 = 0.900 GHz f2 = 0.902 GHz VCC = 3.3 V VCC = 3.0 V
3rd Order Intermodulation Distortion IM3 (dBc)
-60 -50 -40 -30 -20 -10 0 -15 +5 -10 -5 0 +10 Output Power of Each Tone PO (each) (dBm) VCC = 2.7 V f1 = 1.500 GHz f2 = 1.502 GHz VCC = 3.3 V VCC = 3.0 V
+5 -5 +10 -10 0 Output Power of Each Tone PO (each) (dBm)
Remark The graphs indicate nominal characteristics.
22
Data Sheet P12710EJ3V0DS
PC2762TB, PC2763TB, PC2771TB
S-PARAMETERS (TA = +25C, VCC = Vout = 3.0 V)
- PC2771TB - S11-FREQUENCY
0.1 G 3.0 G
2.0 G
S22-FREQUENCY
3.0 G 0.1G
2.0 G
Data Sheet P12710EJ3V0DS
23
PC2762TB, PC2763TB, PC2771TB
TYPICAL S-PARAMETER VALUES (TA = +25C)
PC2771TB
VCC = Vout = 3.0 V, ICC = 35 mA
FREQUENCY MHz 100.0000 200.0000 300.0000 400.0000 500.0000 600.0000 700.0000 800.0000 900.0000 1000.0000 1100.0000 1200.0000 1300.0000 1400.0000 1500.0000 1600.0000 1700.0000 1800.0000 1900.0000 2000.0000 2100.0000 2200.0000 2300.0000 2400.0000 2500.0000 2600.0000 2700.0000 2800.0000 2900.0000 3000.0000 3100.0000 S11 MAG. 0.045 0.057 0.075 0.090 0.105 0.118 0.138 0.163 0.186 0.202 0.219 0.233 0.252 0.267 0.285 0.293 0.304 0.290 0.285 0.273 0.267 0.254 0.237 0.221 0.212 0.208 0.202 0.190 0.178 0.154 0.147 ANG. 19.7 37.0 41.3 43.3 42.2 40.2 34.9 32.5 29.4 26.3 21.7 15.4 8.4 -0.1 -6.8 -13.9 -20.9 -28.1 -35.3 -41.8 -47.4 -51.6 -57.1 -61.1 -68.8 -72.2 -74.1 -76.3 -76.7 -82.3 -88.0 MAG. 10.570 10.638 10.775 11.004 11.275 11.586 12.041 12.367 12.844 13.300 13.771 14.082 14.365 14.336 14.142 13.929 13.428 12.722 11.966 11.232 10.500 9.815 9.168 8.570 7.967 7.507 7.004 6.667 6.336 6.003 5.772 S21 ANG. -4.7 -9.5 -14.1 -19.4 -24.4 -30.0 -35.9 -42.1 -48.8 -56.6 -64.6 -73.5 -83.2 -92.6 -102.4 -112.0 -121.6 -131.0 -139.6 -147.5 -154.8 -161.7 -168.0 -173.7 -179.7 174.9 170.0 164.7 160.7 155.6 151.3 MAG. 0.028 0.028 0.029 0.030 0.030 0.031 0.031 0.032 0.032 0.032 0.033 0.033 0.036 0.036 0.036 0.037 0.039 0.038 0.038 0.038 0.039 0.040 0.041 0.041 0.042 0.043 0.045 0.047 0.051 0.051 0.054 S12 ANG. 0.8 5.0 8.6 11.1 14.9 15.8 19.8 20.1 23.2 23.9 24.9 26.6 28.8 30.0 32.0 31.6 32.5 34.7 36.1 37.4 39.1 41.4 43.7 48.3 48.3 50.8 53.7 54.2 57.7 56.5 59.3 MAG. 0.327 0.325 0.323 0.326 0.331 0.342 0.350 0.359 0.361 0.371 0.389 0.400 0.405 0.402 0.406 0.413 0.414 0.401 0.387 0.378 0.366 0.356 0.342 0.325 0.322 0.314 0.309 0.303 0.292 0.287 0.279 S22 ANG. -6.2 -11.5 -16.2 -20.9 -26.4 -32.0 -37.3 -42.8 -49.4 -56.1 -62.5 -69.3 -75.4 -83.6 -91.6 -99.3 -105.8 -113.7 -120.8 -127.6 -133.1 -138.0 -142.8 -148.3 -152.6 -156.7 -160.1 -164.0 -167.8 -172.8 -176.4 1.65 1.63 1.58 1.49 1.45 1.37 1.29 1.20 1.15 1.11 1.03 0.99 0.92 0.91 0.90 0.89 0.88 0.96 1.03 1.09 1.14 1.20 1.28 1.37 1.44 1.49 1.53 1.56 1.55 1.62 1.61 K
24
Data Sheet P12710EJ3V0DS
PC2762TB, PC2763TB, PC2771TB
PACKAGE DIMENSIONS
6-PIN SUPER MINIMOLD (UNIT: mm)
2.10.1 1.250.1
2.00.2
1.3
0.65
0.65
0.1 MIN.
0.90.1
0.7
0 to 0.1
0.15+0.1 -0.05
0.2+0.1 -0.05
Data Sheet P12710EJ3V0DS
25
PC2762TB, PC2763TB, PC2771TB
NOTES ON CORRECT USE
(1) Observe precautions for handling because of electro-static sensitive devices. (2) Form a ground pattern as wide as possible to minimize ground impedance (to prevent undesired oscillation). All the ground pins must be connected together with wide ground pattern to decrease impedance difference. (3) The bypass capacitor should be attached to the VCC pin. (4) The inductor must be attached between VCC and output pins. The inductance value should be determined in accordance with desired frequency. (5) The DC cut capacitor must be attached to input pin.
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your NEC sales representative.
Soldering Method Infrared Reflow Soldering Conditions Package peak temperature: 235C or below Time: 30 seconds or less (at 210C) Count: 3, Exposure limit: NoneNote Package peak temperature: 215C or below Time: 40 seconds or less (at 200C) Count: 3, Exposure limit: NoneNote Soldering bath temperature: 260C or below Time: 10 seconds or less Count: 1, Exposure limit: NoneNote Pin temperature: 300C or below Time: 3 seconds or less (per side of device) Exposure limit: NoneNote Recommended Condition Symbol IR35-00-3
VPS
VP15-00-3
Wave Soldering
WS60-00-1
Partial Heating
-
Note After opening the dry pack, keep it in a place below 25C and 65% RH for the allowable storage period. Caution Do not use different soldering methods together (except for partial heating). For details of recommended soldering conditions for surface mounting, refer to information document SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E).
26
Data Sheet P12710EJ3V0DS
PC2762TB, PC2763TB, PC2771TB
[MEMO]
Data Sheet P12710EJ3V0DS
27
PC2762TB, PC2763TB, PC2771TB
ATTENTION
OBSERVE PRECAUTIONS FOR HANDLING
ELECTROSTATIC SENSITIVE DEVICES
NESAT (NEC Silicon Advanced Technology) is a trademark of NEC Corporation.
* The information in this document is current as of February, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).
M8E 00. 4

▲Up To Search▲

Price & Availability of UPC2762TB1

	To Download UPC2762TB1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .